@article {2195, title = {A procedure for measuring latencies in brain-computer interfaces.}, journal = {IEEE Trans Biomed Eng}, volume = {57}, year = {2010}, month = {06/2010}, pages = {1785-97}, abstract = {

Brain-computer interface (BCI) systems must process neural signals with consistent timing in order to support adequate system performance. Thus, it is important to have the capability to determine whether a particular BCI configuration (i.e., hardware and software) provides adequate timing performance for a particular experiment. This report presents a method of measuring and quantifying different aspects of system timing in several typical BCI experiments across a range of settings, and presents comprehensive measures of expected overall system latency for each experimental configuration.

}, keywords = {Brain, Computer Systems, Electroencephalography, Evoked Potentials, Humans, Models, Neurological, Reproducibility of Results, Signal Processing, Computer-Assisted, Time Factors, User-Computer Interface}, issn = {1558-2531}, doi = {10.1109/TBME.2010.2047259}, url = {http://www.ncbi.nlm.nih.gov/pubmed/20403781}, author = {Adam J Wilson and Mellinger, J{\"u}rgen and Gerwin Schalk and Williams, Justin C} } @article {2190, title = {Using an EEG-based brain-computer interface for virtual cursor movement with BCI2000.}, journal = {J Vis Exp}, year = {2009}, month = {07/2009}, abstract = {

A brain-computer interface (BCI) functions by translating a neural signal, such as the electroencephalogram (EEG), into a signal that can be used to control a computer or other device. The amplitude of the EEG signals in selected frequency bins are measured and translated into a device command, in this case the horizontal and vertical velocity of a computer cursor. First, the EEG electrodes are applied to the user s scalp using a cap to record brain activity. Next, a calibration procedure is used to find the EEG electrodes and features that the user will learn to voluntarily modulate to use the BCI. In humans, the power in the mu (8-12 Hz) and beta (18-28 Hz) frequency bands decrease in amplitude during a real or imagined movement. These changes can be detected in the EEG in real-time, and used to control a BCI ([1],[2]). Therefore, during a screening test, the user is asked to make several different imagined movements with their hands and feet to determine the unique EEG features that change with the imagined movements. The results from this calibration will show the best channels to use, which are configured so that amplitude changes in the mu and beta frequency bands move the cursor either horizontally or vertically. In this experiment, the general purpose BCI system BCI2000 is used to control signal acquisition, signal processing, and feedback to the user [3].

}, keywords = {Brain, Calibration, Electrodes, Electroencephalography, Humans, User-Computer Interface}, issn = {1940-087X}, doi = {10.3791/1319}, url = {http://www.ncbi.nlm.nih.gov/pubmed/19641479}, author = {Adam J Wilson and Gerwin Schalk and Walton, L{\'e}o M and Williams, Justin C} } @article {2186, title = {Two-dimensional movement control using electrocorticographic signals in humans.}, journal = {J Neural Eng}, volume = {5}, year = {2008}, month = {03/2008}, pages = {75-84}, abstract = {

We show here that a\ brain-computer\ interface (BCI) using electrocorticographic activity (ECoG) and imagined or overt motor tasks enables humans to control a\ computer\ cursor in two dimensions. Over a brief training period of 12-36 min, each of five human subjects acquired substantial control of particular ECoG features recorded from several locations over the same hemisphere, and achieved average success rates of 53-73\% in a two-dimensional four-target center-out task in which chance accuracy was 25\%. Our results support the expectation that ECoG-based BCIs can combine high performance with technical and\ clinical\ practicality, and also indicate promising directions for further research.

}, keywords = {Adolescent, Adult, Brain Mapping, Data Interpretation, Statistical, Drug Resistance, Electrocardiography, Electrodes, Implanted, Electroencephalography, Epilepsy, Female, Humans, Male, Movement, User-Computer Interface}, issn = {1741-2560}, doi = {10.1088/1741-2560/5/1/008}, url = {http://www.ncbi.nlm.nih.gov/pubmed/18310813}, author = {Gerwin Schalk and Miller, K.J. and Nicholas R Anderson and Adam J Wilson and Smyth, Matt and Ojemann, J G and Moran, D and Jonathan Wolpaw and Leuthardt, E C} } @article {2175, title = {ECoG factors underlying multimodal control of a brain-computer interface.}, journal = {IEEE Trans Neural Syst Rehabil Eng}, volume = {14}, year = {2006}, month = {06/2006}, pages = {246-50}, abstract = {

Most current brain-computer interface (BCI) systems for humans use electroencephalographic activity recorded from the scalp, and may be limited in many ways. Electrocorticography (ECoG) is believed to be a minimally-invasive alternative to electroencephalogram (EEG) for BCI systems, yielding superior signal characteristics that could allow rapid user training and faster communication rates. In addition, our preliminary results suggest that brain regions other than the sensorimotor cortex, such as auditory cortex, may be trained to control a BCI system using similar methods as those used to train motor regions of the brain. This could prove to be vital for users who have neurological disease, head trauma, or other conditions precluding the use of sensorimotor cortex for BCI control.

}, keywords = {Adult, Brain Mapping, Cerebral Cortex, Communication Aids for Disabled, Computer Peripherals, Evoked Potentials, Female, Humans, Imagination, Male, Man-Machine Systems, Neuromuscular Diseases, Systems Integration, User-Computer Interface, Volition}, issn = {1534-4320}, doi = {10.1109/TNSRE.2006.875570}, url = {http://www.ncbi.nlm.nih.gov/pubmed/16792305}, author = {Adam J Wilson and Felton, Elizabeth A and Garell, P Charles and Gerwin Schalk and Williams, Justin C} }